Motorola r765IS

88
advanced features
• The person that you are trying to reach may
not be in MOTOtalk.
• The person that you are trying to reach is
set to a different channel or is out of range.
Private Only
To limit MOTOtalk to private conversation
only, set your code to Private Only. In this
mode, code calls will be ignored and only
Private calls can be made or received.
Note: You will be required to enter a valid
PTN before pressing the PTT button.
set the code to Private Only
1 From the MOTOtalk idle screen, press -
under
Edit .
2 Scroll to Code .
3 Press - under Edit .
4 Select Pvt Only .
make a Private MOTOtalk call
1 Enter the 10-digit PTN of the person you
want to call on your channel.
or
Scroll to a number or name in
Contacts .
or
Scroll to a number in the recent calls list.
2 Press and hold the PTT button. Begin
speaking after your handset emits the
MOTOtalk tone.
3 Release the PTT button to listen.
The number or name of the person you are
calling will appear in the first line of the
display.
receive a private MOTOtalk call
The number or name of the person who
initiated the call will appear in the first line of
the display.
r765_Armadillo.book Page 88 Wednesday, August 27, 2008 7:01 PM