Customizing Phone Features 105
Unblock the PIN2 Code
If your old PIN2 number is entered incorrectly three
times in a row,
Blocked appears in the display. You
needs to enter a PIN unblocking key (PUK), which
you can obtain from your service provider.
1.
Press ß, ß, º, ∞, ™, ß.
2.
Enter unblocking key. Enter the 8-digit
unblocking code, and then press
ø. Your
service provider supplies this code.
3.
Enter a new PIN2 code, and then press ø.
4.
Re-enter the new PIN2 code, and then
press
ø.
Change the Security Code
The security code is your phone’s primary security
number. You use it to reset your phone to its default
settings and prevent access to your phone book. It
is originally set to 000000.
1.
Follow the steps in the “1-2: Getting to
Phone Setup...” to get to
New Security
Code
, and then press ø to select. You will
see
Enter Security Code.
2.
Enter the current security code, and then
press
ø. You will see Enter New Security
Code
.
3.
Enter a new security code, and then
press
ø. You will see Secur. Code and the
six-digit number selected.
4.
Press and hold ç to exit the menu.
Mobile.book Page 105 Wednesday, September 9, 1998 3:05 PM
To Next Page
Loading...
