76 Using Calling Features
1-2:
Getting to Call Related Features...
1.
Press M until you see Call Related Features, and then
press
ø.
2.
Press M to scroll to one of the features described below. You
will see the feature name, along with
Select?.
Showing Signal Strength
Use this feature to check the strength of the signal
that your phone is receiving from the Iridium satellite
network.
1.
Follow the steps in “Deactivating Pending
Call Drop Signal” to get to
Show Signal
Strength
.
2.
Press ø to select. You will see:
After a few seconds, if the phone is able to
locate a signal, the signal strength indicator
appears in the upper left corner of the
display.
rx
The signal strength meter remains on the
display for several seconds. If the phone
cannot locate a signal, you will see
Weak
Signal
.
3.
Press and hold ç to exit the menu.
12:00
Checking
Signal ...
Mobile.book Page 76 Wednesday, September 9, 1998 3:05 PM
To Next Page
Loading...
