114 Accessing the Network
1-2:
Getting to Network Selection...
1.
Press M until you see Network Selection, and then
press
ø.
2.
Press M to scroll to one of the features described below.
You will see the feature name, along with
Select?.
Registering With the Satellite Network
If you know your phone is outside the range of your
local service, use this feature to access Iridium
satellite service.
Your phone searches for the Iridium satellite
network.
1.
Rotate and extend the antenna upward.
See “Placing Calls” on page 23.
2.
Follow the steps in “1-2: Getting to Network
Selection...” to get to
Register Now.
3.
Press ø to select. You will see
Registering.... This may take a few
seconds.
If the phone finds the signal, you will see
Registered and the signal strength
indicator:
rx
The n indicator also appears.
If the phone is unsuccessful you may see
one of these messages: System Busy,
Restricted Area or Weak Signal.
Mobile.book Page 114 Wednesday, September 9, 1998 3:05 PM
To Next Page
Loading...
