146
Your PIN is
blocked.
Enter the PIN unblocking code or contact your service
provider.
Your PIN2 is
blocked.
Enter the PIN2 unblocking code or contact your service
provider.
Your SIM card
won’t work.
•
Is the card inserted the correct way?
•
Is the gold chip visibly damaged or scratched?
Return the card to your service provider.
•
Check the SIM and phone contacts. If they are dirty,
clean them with an antistatic cloth.
You can’t cancel
Call Forwarding or
Call Barring.
Wait until you are in an area with good network coverage
and try again.
The
o symbol
is flashing.
There is not enough memory available to store another
message. Use the Messages menu to delete one or more
messages.
You find your
phone becoming
warm during use.
You may notice this during long calls or during charging.
The heat is produced by the electronic components
within your phone and is quite normal.
Your phone has
your SIM card
inside but the
display says:
•
Check Card or
Insert Card
.
Check that the SIM card has been inserted correctly.
The contacts of the SIM card may be dirty. Turn the
phone off, remove the SIM card and rub the gold
chip on the card with a clean cloth. Replace the card
in the phone.
•
Blocked or Bad Card See Supplier.
Please contact your service provider.
You find your
phone’s prompts
in a language
other than your
own.
Press M, ™, §. This routes you directly to the
language selection submenu. Press M until you see
your preferred language. Press ø to select.
Problem Solution
Mobile.book Page 146 Wednesday, September 9, 1998 3:05 PM
To Next Page
Loading...
