Motorola SB5100 Series - Page 24

Setting Up a USB Driver in Windows 2000, continued
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary
License
SB5100 Series Cable Modem User Guide 18
7 On the Insert Disk window, click OK. The Files Needed window is displayed.
8 For the SB5100 or SB5101, if necessary, select your CD-ROM drive in the “Copy
files from” list.
or
For the SB5120, be sure that the SB5120 CD-ROM is in the CD-ROM drive.
9 For the SB5100 or SB5101, Click Browse.
or
For the SB5120, if necessary, select your CD-ROM drive in the “Copy files from” list
and skip to step 11.
10 For the SB5100 or SB5101, double-click the NetMotCM.sys file in the CD-ROM root
directory. The Files Needed window is displayed.
11 Click OK. The Found New Hardware Wizard window is displayed.