Chapter 3
Man-Machine Interface
3.1
LED Indications
NOTICE: LED Coverage Indicator and LED Power Indicator are differentiated on the radio. See
Controls and Indicators on page 60 for the positions of the two LED.
Table 9: LED Status Indications
Indication Status
Solid green
• In use.
• Repeating call.
Blinking green
• In service or idle.
Solid red
• Out of service.
• Switching between modes, for example, DMO to TMO.
Blinking red
• Connecting to the network.
• Entering DMO.
Solid orange
• Radio is powering up.
• Transmit inhibit in service.
• Channel busy in DMO.
• Radio interference in DMO.
Blinking orange
• Incoming call.
No indication
• Radio powered down.
• Radio in Covert Mode.
Table 10: Battery Charging LED Indications
Indication
Status
Solid green Battery fully charged
Blinking green Battery charged at 90%
Solid red Rapid or trickle charge
Blinking red Faulty or invalid battery
Blinking orange Battery is waiting to charge
MN002955A01-AA
Man-Machine Interface
Send Feedback 59