3.9
Audio Toggle
You can control audio routing between the speaker and earpiece for any private or group call through
the dedicated One-Touch Button. The default setting for this feature is configurable in the Customer
Programming Software (CPS).
3.10
Volume Adjustment Mode
The Volume Control Mode is configurable using the Customer Programming Software (CPS).
NOTICE: When a volume control capable Bluetooth device is connected, the radio always uses
the Common setting.
The max volume offset (dB) and the volume range (dB) are configurable through CPS (Audio Settings
→ User Profile). The volume control in the radio is divided into 13 steps, from 0 to 14. If, for example,
the vol. range is set to 39, each step on the volume indication bar is 3 dB.
3.11
Accessory Setup
You can connect CORE or Other accessories to the audio connector at the bottom of the radio.
If you connect a CORE or Other (for example, a third-party accessory) accessory, the radio may detect
the connection but manual selection is required at the Accry Setup menu.
The Accry Setup menu contains the supported accessories, represented by their Model Number as
defined by the related Audio Device Descriptor (ADD). ADD is a set of parameters in the radio that
defines the audio settings, such as gains and filters settings, for each accessory.
NOTICE:
To ensure proper connection of the audio accessory, fully insert the audio connector
into the audio port of the radio. To resolve connection issues caused by partial insertion,
remove and reinsert the audio connector.
3.12
Audio Features
Different audio quality and adaptive audio parameters can be configured according to the working
environment.
There are many situations where the demand of audio quality changes according to the working
environment. For example, an airport worker, who works partly in the field where there is lots of noise
coming from the surrounding environment and partly inside the airport where there is relatively less
noise, may experience different audio quality.
3.12.1
Audio Profile
The radio supports an audio profile which is configurable using the Customer Programming Software
(CPS).
The following parameters can be configured for the audio profile:
• Mic Gain offsets.
• Howling Gains.
• AGC, Echo Canceller, and RX/TX Noise suppressor.
• Voice offsets and ranges for different audio devices.
MN002955A01-AA
Chapter 3: Man-Machine Interface
Send Feedback 69