Motorola ST7000 - Idle Display; Table 16: General Icons

Icon Description
Indicates that the Repeater or GW + Rep option in DMO mode is selected. This icon
has the following states:
• Solid - when the radio has detected the repeater, for example, when the radio re-
ceives a presence signal.
• Blinking - when the radio has not detected the repeater or during attachment.
• No icon - during a radio-to-radio and gateway call.
Table 16: General Icons
Icon Description
Low Audio
Audio mode is changed to low.
High Audio
Audio mode is changed to high.
Earpiece Connected
Earpiece is connected.
Battery Strength
Indicates the charge of the battery.
Battery Charging
Indicates that the battery is charging.
Emergency
Radio is in Emergency Operation.
Bluetooth Connected
Bluetooth is enabled and at least one device is connected.
Bluetooth Disconnected
This icon has the following states:
• Solid - Bluetooth is enabled but no device is connected.
• Blinking - Bluetooth is enabled and the radio is in Discoverable Mode or connection
with a remote device is being established.
3.5.2
Idle Display
The terminals provide access to all services from the main idle display.
Your service provider can configure the idle display. The idle display can show the following:
• Icons on the status area (top line):
- Status icons in Trunked Mode Operation (TMO) signal level icon.
- Battery level displayed at all times.
NOTICE:
The terminal periodically repeats the audible and visible indication of low
battery.
• Displays a single line of text which can comprise of multiple information. The content of this
information depends on the Configurable Idle Screen settings.
MN002955A01-AA
Chapter 3: Man-Machine Interface
Send Feedback 65