Operating the MT2070/MT2090 2 - 17
Scan Item
The Scan Item screen allows the user to transmit bar code data to the host PC. To access Scan Item, start at the
Home screen, scroll to Scan Item and press ENT.
Figure 2-11
Scan Item Screen
The following options are available:
•
Scan a bar code. The data displays briefly in the Item: field and the bar code data transmits to the host PC
(Quantity defaults to a value of one and transmits one bar code.)
•
Key an SKU or bar code data manually using the keyboard. Press ENT to transmit the data to the host PC.
(Quantity defaults to a value of one and transmits one SKU or bar code.)
•
Press the up Scroll key to access the Quantity field; enter a quantity using the keyboard. Scan a bar code (or
enter an SKU/bar code manually and press ENT). The data transmits x times, where x = the quantity entered,
with a programmable delay between each transmit.
•
Select Menu > Options... to set the transmit format (see Menu on page 2-18).
Quantity
Enter the quantity of SKUs or bar code data to transmit to the host PC (0 to 99999). Quantity defaults to a value of
one and transmits one bar code.
Item
The Item: field is highlighted by default. Scan a bar code or use the numeric keys to manually enter an SKU or bar
code. The default symbology type is Code 128.
To Next Page
Loading...
