Accessories 13 - 7
Four Slot Battery Charger
The Symbol SAC2000-4000CR four slot spare battery charger charges up to four single spare batteries. The
cradle can sit on a desktop or be mounted on a wall. This document provides basic instructions for cradle set up
and use.
For best performance, fully charge the device battery before using the device for the first time. To charge the
device battery, insert the battery in the cradle. The battery begins charging when the LED indicator on the battery
charger starts flashing green. A complete charge of a fully discharged battery can take up to four hours. Charge
within the recommended temperature of 32° to 104° F (0° C to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal.
Features
See Cradle Features on page 1-4.
Inserting Batteries
To insert batteries in the cradle, align the connectors on the bottom of the battery with the battery charging
connectors in the cradle. Push down on the top of the battery until it clicks into place, engaging the contacts in the
cradle.
Figure 13-2
Inserting Batteries
Charging Batteries
The battery begins charging when the green LED indicator flashes. A complete charge of a fully discharged battery
can take up to four hours using external power.
To Next Page
Loading...
