Operating the MT2070/MT2090 2 - 45
5. Enter the password and select OK. The certificate(s) are imported.
Server Certificate Selection
If the user selects the Validate Server Certificate check box, a server certificate is required.
Select a certificate from the drop-down list of currently installed certificates in the Installed Server Certificates
dialog. An hour glass may appear as the wizard populates the existing certificate list. If the required certificate is
not listed, install it.
Figure 2-49
Installed Server Certificates Dialog Box
Server Certificate Installation
To install a server certificate for authentication:
1. Tab to Install Certificate and press ENT. The Import Certificate dialog displays. Choose Import from File (.cer,
.pfx) and select OK.
Figure 2-50
Import Certificates Dialog Box
NOTE Installing a user certificate from a file requires that the file be of type “*.pfx”. Also this file type requires the
user to supply a password in order to be read by Fusion.
To Next Page
Loading...
