Parameter Value
GPS Antenna
Body worn folded monopole (semi-rigid) integrated
into the TETRA antenna
Body worn folded monopole (dribble) integrated into
the TETRA antenna
Integrated into the patch connected to the TETRA
body-worn antenna
Sensitivity -152 dBm / -182 dBW
Accuracy (Measured at -137 dBm)
5 meters - 50% probable
10 meters - 95% probable
Note: This specification may be subject to change without further notice. All product features are subject to
infrastructure support. Selected features are subject to optional software upgrade.
Ordering Options for Radios and Features
TETRA terminals are only available to accredited channel partners who are advised of the discount structure applied
to these products.
Software options can be ordered and enabled in three ways:
• You can have them enabled at the Distribution Centre (DC).
• If you have iTM, you can enable them with a license.
• You can order by using dongle.
Dongle Enablement – Software Enablement Kits
Each software enablement kit ordered provides one dongle for the customer with a specific number of counters set
according to the number of software options ordered. This kit number is applicable to both new orders or existing
fielded terminals which require software enablement.
The features are enabled at the same time the customer programs the radio. The enablement for all the selected
features is performed in one operation.
Ordering a Software Enablement Kit
Procedure:
1 Order the standard software enablement kit (main kit) – GM0193.
2 Add software feature options.
Note: You can select more than one feature for each main kit.
3 Order a quantity equaling the number of models requiring an option.
Product Overview | 23
| | Send Feedback
To Next Page
Loading...
Need help?
General
