6 - 30 MTH800 TETRA Handportable Terminal / Basic Service Manual MAINTENANCE
0104023J25 Audio assembly cap 1
0116541H01 Flex, selector assembly 1
7587509V86 Selector Seal Pad 1
0287571V04 Selector nut 1
3687537V05 Selector knob 1
3687537V02 Selector knob cover 1
0387839V01 Selector screw (M2) 1
0387839V01 UCM Screw 1
5086346J05 Microphone 2
5086940J02 Earpiece with support ring 1
3271288L01 Earpiece boot 1
0188809V36 Accessory connector assembly 1
2787832V42 Chassis 1
0187506V56 Flex, Main 1
5916357H01 Vibrator 1
3271289L01 Battery contact seal 1
0187506V59 Vehicle adapter (VA) lock internal seal 1
3287842V20 Vehicle adapter (VA) lock external seal 1
3287842V18 Antenna switch external seal 1
3287842V05 Antenna switch internal seal 1
5487503V70 Label model 1
5487503V69 FCC label 1
5486278T02 Logo label 1
0387839V75 External screw 6
0188809V58 Battery assembly cover, slim (800mAh) 1
1587508V03 Battery cover 1
0188809V59 Battery door assembly, thick (1500mAh) 1
1587508V06 Battery door, thick 1
FTN6308 Digital Car Kit (DCK) cradle for testing an
assembled terminal. FTN6308 is not sold
separately. It is part of Digital Car Kit FTN6307.
1
3086228J02 RF Cable for cradle, with N-type female output
connector, for use with FTN6308. FTN6308 is
not sold separately. It is part of Digital Car Kit
FTN6307.
1
2888482K04 Cable adapter. Enables testing of a stand-alone
main board.
1
Part/Kit Number MTH800 Model Description Quantity
To Next Page
Loading...
