Learning to Use Your Phone -
55
If You Forget a Code, PIN, or Password
Note:
Your phone’s 4-digit unlock code is originally set to 1234, and
the 6-digit security code is originally set to 000000. Your service
provider may reset the unlock code to the last 4 digits of your phone
number before you receive your phone.
If you forget your unlock code, try entering 1234 or the last 4 digits of
your phone number. If that does not work, do the following at the
prompt:
If you forget your security code, SIM card PIN code, PIN2 code, or
call barring password, contact your service provider.
Using the Phonebook
This section describes basic phonebook operations. For more
information about using the phonebook, see page 79.
Storing a Phone Number
Enter a phone number in the home screen, then press
(
+
)
to create a phonebook entry with that number. Press
(
(
-
)to
store the number by itself, or fill in the other fields as necessary to
complete the entry.
Press To
1
keypad keys enter your unlock code
2
#
(
+
) activate automatic lock
Press To
1
M
display the unlock code bypass screen
2
keypad keys enter your security code
3
#
(
+
) submit your security code
UG.GSM.V3.book Page 55 Monday, August 23, 2004 3:10 PM