Motorola V360 - General Operation; Controls, Indicators, and Input; Output (I;O) Connections

14 May 18, 2005 6809493A69-O
General Operation V360
General Operation
Controls, Indicators, and Input / Output (I/O) Connections
The V360 series telephone’s controls are located on the sides of the flip and on the
keypad. Indicators, in the form of icons, are displayed on the LCD (see Figure 2).
V360 phones have an audible alert transducer on the top and I/O connectors,
consisting of a charger/accessory port, located on the side of the phone. See Figure 1.
“Soft keys” refer to non-labeled keys that correspond to text options displayed on
the screen. The left and right soft keys perform the function shown in the corners
of the display. The right key will usually select an option whereas the left key will
usually exit a function or return to a previous screen.
The menu key opens the initial menu structure, or allows access to a submenu
whenever
M appears on the display.
050307o
Figure 1. Controls, indicators, and I/O
Left Soft Key
Navigate menus.
Select menu items.
Open menus.
Volume Keys
Charge up.
Voice dial.
Right Soft Key
Turn on & off,
hang up, exit menus.
Go handsfree.
Make & answer calls.
PTT/Smart Key