44 Wireless
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
2 Touch >
Settings > Wireless & networks
>
Bluetooth settings.
3 Touch
Bluetooth to turn on Bluetooth power, if
necessary.
4 Touch
Find nearby devices.
5 Touch a device to connect.
6 If necessary, touch
Pair, or enter the device passkey
(like
0000) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status panel.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
Reconnect devices
To reconnect your tablet with a paired device, touch
the device name in the
Paired devices list.
Disconnect devices
To disconnect your tablet from a paired device, touch
the device name in the devices list, then touch
Menu >
Disconnect.
Tip: Turn off Bluetooth power to extend battery life or
stop connections—touch >
Settings
>
Wireless & networks > Bluetooth.
Wi-Fi™
Turn on & off
Find it: >
Settings > Wireless & networks
>
Wi-Fi
Note: To extend battery life, turn off Wi-Fi power when
not in use.
Wi-Fi search & connect
To find networks in your range:
1 Touch > Settings > Wireless & networks
>
Wi-Fi Settings
2 Touch Wi-Fi to turn on and scan. If Wi-Fi is already
on, touch Menu >
Scan. Your tablet lists the
networks it finds within range.
everest.ug.PRINT.Feb2011.fm Page 44 Tuesday, February 15, 2011 6:25 PM
To Next Page
Loading...
