NPort 5000 Series User Manual
Using NPort CE Driver Manager
After you install NPort CE Driver Manager, you can set up the NPort’s serial ports as remote COM ports for
your Windows CE. Make sure that the serial port(s) on your NPort are set to Real COM mode when mapping
COM ports with NPort CE Driver Manager.
1. Go to Start > Programs > NPort CE Driver Manager.
2. Click on the COM Mapping page and then the “Search” button to scan for NPort servers
3. All NPort servers that were located will appear in the NPort CE Driver Manager window. Click on the
server whose COM ports you would like to map to and then select the port index. Note that multiple
selections are allowed.
To Next Page
Loading...
Need help?
General
