Moxa Technologies NPort 5250A User Manual

NPort 5000 Series User Manual
130
Changing Advanced Settings and Serial Parameters of the COM Group
1. Check the port specified on the COM Grouping page as the signal port.
2. Select the ”Signal Status” controlled port and then right-click and select COM Settings.
3. The Advanced Settings and Serial Parameters pages will be available for modification.

Moxa Technologies NPort 5250A Specifications

General

Certification	CE, FCC EN 55022 Class A, FCC Part 15 Subpart B Class A EN 55024 EN 61000-4-4 EN 61000-4-5
Serial interface type	RS-232/422/485
Serial ports quantity	1
Supported network protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2
Storage temperature (T-T)	-40 - 75 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Safety	UL 60950-1, EN 60950-1

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	77 x 111 x 26 mm