NPort 6000 Series Common Settings and Others
Common Settings
Ping
You can ping an IP address from the NPort 6000 web console in order to test the Ethernet connection. Enter the
IP address or domain name in the Destination field to make sure that the connection is OK.
Change Password
For all changes to the NPort 6000’s password protection settings, you will first need to enter the old password.
If you are setting up password protection for the first time, the old password is the default password: moxa.
To set up a new password or change the existing password, enter your desired password under both New
password and Confirm password. You will need to save/restart the NPort device in order for the new
password to take effect.
ATTENTION
If you forget the password, please contact the administra
tor(s) of the NPort 6000 to retrieve or reset your
password. Or if you are the administrator, you will need to use the reset button on the NPort 6000’s casing to
load the factory defaults. (Please refer to Chapter 10 for account management details.)
you set a password for the first time, it is a good idea to export the configuration to a file when you
have finished setting up your NPort 6000. Your configuration can then be easily imported back into the NPort
6000 if you need to reset the NPort 6000 d
ue to a forgotten password or for other reasons. Please refer to
Chapter 9 on Configuration Import/Export for more details.
To Next Page
Loading...
Need help?
General
