UC-8410A HW UM Introduction
Overview
The UC-8410A computer comes with various communication interfaces, which make it an ideal communication
platform for industrial applications. The communication interfaces include eight RS-232/422/485 serial ports,
three 10/100/1000 Mbps Ethernet ports, four digital input and four digital output channels, and a wireless
communication slot (not available in the –NW model). In addition, the UC-8410A is provided with an mSATA
slot for storage expansion, and 2 USB ports for additional memory (such as a USB flash drive). The computer
is built using a NXP Cortex-A7 dual-core 1 GHz RISC CPU. This powerful computing engine supports several
useful communication functions, but will not generate too much heat. The computer's built-in 8 GB eMMC and
1 GB DDR3 SDRAM give you sufficient memory to run your application software while the SD slot and mSATA
socket provide you the flexibility to expand the data storage capacity.
Package Checklist
Before installing the UC-8410A, verify that the following items are in the package:
• UC-8410A embedded computer
• Wall-mounting kit
• Power jack
• 3-pin terminal block for power
• CBL-4PINDB9F-100: 4-pin pin header to DB9 female console port cable, 100 cm
• Quick installation guide (printed)
• Warranty card
NOTE: Please notify your sales representative if any of the above items are missing or damaged.
Product Features
• NXP LS1021A Cortex-A7 1 GHz dual-core processor
• 8 GB eMMC with OS preinstalled
• 1 GB DDR3 SDRAM
• 8 x RS-232/422/485 serial ports
• 3 x 10/100/1000 Mbps Ethernet ports
• 1 x Mini-PCIe socket for wireless expansion (not available in the –NW model)
• -40 to 75°C system operating temperature
• Ready-to-run Debian 8/Debian 9
To Next Page
Loading...
