Installation 6-3PTX-PRO User and Technical Manual
Note
The versatility of the Quick Release Mount and a
mating Dovetail Adapter Plate allow the Dovetail
Adapter Plate to be attached to the bottom of the
PTX-PRO and the Quick Release Mount to be
attached to a non-MRC tripod, or vice versa. The
method you use to attach the PTX-PRO to a non-
MRC tripod is your choice.
Optional mounting procedures and illustrations to
mount your PTX-PRO on non-MRC tripods are
provided in the following paragraphs.
Mounting - Non-MRC Tripod (Option 1) To mount a PTX-PRO
on a non-MRC tripod, one option is to attach the Quick Release
Mount to the bottom of the PTX-PRO using four 1/2-inch long,
#6-32, flat head screws.
The Dovetail Adapter Plate is then attached to the non-MRC
tripod and the Quick Release Mount and PTX-PRO assembly is
attached to the Dovetail Adapter Plate on the tripod mount.
See Figure 6-2.
Figure 6-2: Dovetail Adapter Plate on Non-MRC Tripod
Mounting - Non-MRC Tripod (Option 2) To mount a PTX-PRO
on a non-MRC tripod, another option is to attach the Dovetail
Adapter Plate to the bottom of the PTX-PRO using four 1/2-inch
long, #6-32, flat head screws.
The Quick Release Mount is then attached to the non-MRC
tripod and the Dovetail Adapter Plate and PTX-PRO assembly is
attached to the Quick Release Mount on the tripod mount. See
Figure 6-3 on page 6-4.
Quick Release
Mount (Attached to
PTX-PRO)
Flat Head Screws
(4 Each)
Dovetail
Adapter
Plate
Tripod
Mount
To Next Page
Loading...
