MRW Vib-Control 04 User Manual

MRW Vib-Control 04
27. Oktober 2014
11 v. 34
Safety
Noise emission
WARNING!
Hearing loss due to noise!
The noise level that occurs in the work area can cause
severe hearing loss.
Therefore:
 Always wear hearing protection when working
with the machine.
 Only be in the danger zone to the extent
required.
2.6 Signage
WARNING!
Danger of injury due to illegible symbols!
Over time, stickers and signs can be become fouled or
can become illegible in some other manner.
Therefore:
 Keep all safety, warning, and operating
instructions that are affixed to the control unit
in legible condition.
 Replace damaged signs or stickers
immediately.
Unplug the plug before opening!
Unplug the power plug before opening the housing.
Do not pull the plug out of the power outlet by the cable but by the
power plug itself.
CAUTION!
Residual voltage
A minimum waiting period of 5 minutes must be observed after
disconnecting the control unit from the power and before opening it
so that the charge of the capacitators can decrease to a safe level.

MRW Vib-Control 04 Specifications

General

Brand	MRW
Model	Vib-Control 04
Category	Controller
Language	English