MRW Vib-Control 04 - X17 Screw Terminal Connection in the Device

MRW Vib-Control 04
26 v. 34 27. Oktober 2014
Installation
and commissioning
5.5 X17 screw terminal connection in the device
CAUTION!
Residual voltage
A minimum waiting period of 5 minutes must be observed after
disconnecting the control unit from the power and before opening it
so that the charge of the capacitators can decrease to a safe level.
Description of the X17
Besides parallel connections to the X16 and X17 connectors, the
screw clamp connection provides further control options for the Vib-
Control 04.