EasyManua.ls Logo

MSA ALTAIR Pump Probe - Operation; Using the ALTAIR Pump Probe

MSA ALTAIR Pump Probe
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
Operation
14
3.2 To Clear an Alarm
(1) Correct any flow blockage.
(2) Press the POWER ON/OFF button to restart the pump.
3.3 Turning OFF
Press and hold the POWER ON/OFF button for about three seconds.
Flow LED should turn red.
The pump shuts down.
The audible alarm sounds.
3.4 Low Battery Warning
A Low Battery Warning indicates that a nominal 30 minutes of operation remain
before device batteries are completely depleted.
NOTE: Duration of remaining Pump Probe operation during Low Battery
Warning depends on:
- Ambient temperatures
(The Low Battery Warning is likely to be shorter in colder temperatures.)
When the device switches into Low Battery Warning:
- Red Battery LED will flash every two seconds.
- The pump continues to operate until the device is turned OFF or Low Battery
Shut Down occurs.
Attention!
During "Low Battery Warning" condition, prepare to exit the work area since
the device could go into "Low Battery Shut Down" at any time, resulting in loss
of pump operation. Depending on the age of the batteries, ambient tempera-
ture and other conditions, the device "Low Battery Warning" and "Low Battery
Shut Down" times could be shorter than anticipated.
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - info@fasit.it

Related product manuals