EasyManua.ls Logo

MSA ALTAIR Pump Probe - 1 Safety Regulations; Correct Use

MSA ALTAIR Pump Probe
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
Safety Regulations
6
1 Safety Regulations
1.1 Correct Use
This device is intended for use by trained and qualified personnel.
It is imperative that all users of this product read and follow this operating
manual. In particular, the safety instructions, as well as the information for the
use and operation of the product, must be carefully read and observed. Further-
more, the national regulations applicable in the user's country must be taken
into account to promote safe use.
Alternative use, or use outside these regulations is considered as non-
compliant. This also applies especially to unauthorised alterations to the
product and to commissioning work that has not been carried out by MSA or
authorised persons.
WARNING
Read and follow all instructions carefully.
Check pump for proper operation before each day’s use.
Do not place end of sample line in liquids.
Do not charge in a combustible atmosphere.
Do not alter or modify device.
Use only MSA-approved sampling lines.
Do not use silicone tubing for sampling lines.
Wait sufficient time for the reading; response times vary, based on gas and
length of sampling line.
Do not use if function test is unsuccessful, the device is damaged, improperly
serviced/maintained, or genuine MSA spare parts have not been used.
INCORRECT USE CAN CAUSE SERIOUS PERSONAL INJURY OR DEATH.
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - info@fasit.it

Related product manuals