Need help?Do you have a question about the MSA galaxy GX2 and is the answer not in the manual?
General| Type | Automated Test System |
|---|---|
| Display | LCD |
| Calibration | Automatic |
| Gas Detection | Multiple gases |
| Compatibility | MSA ALTAIR |
| Connectivity | USB |
| Calibration Duration | Approx. 2 minutes |
| Storage Temperature | -20°C to 60°C |
| Operating Humidity | 0 to 95% RH non-condensing |
| Data Logging | Yes |
| Enclosure | Plastic |
| Measurement Range | Varies by sensor |
| Resolution | Varies by sensor |
| Accuracy | Varies by sensor |
| Response Time | Varies by sensor |
Essential safety protocols, including warnings on lubricants, environments, and genuine parts.
Details warranty coverage, limitations, and the exclusive remedy for product defects.
Overview of the GALAXY GX2, its test stand, and core functions.
Explains SD card use, PC networking, stand-alone mode, and USB drives.
Details the electronic cylinder holder, RFID tags, and gas pressure monitoring.
Guidelines for handling reactive gases like chlorine or ammonia during testing.
Step-by-step guide for connecting multiple Test Stands and Cylinder Holders.
Setting up language, date, time, and security for the GALAXY GX2.
Configuring gas detector settings and managing cylinder assignments and expiration.
Procedures for inserting instruments and performing calibration or bump tests.
Understanding pass/fail indicators, calibration data, and error conditions.
Enabling and using the automatic calibration feature for specific gas detectors.
Troubleshooting common problems like test failures, errors, and connectivity issues.
Identifying and replacing common parts like filters, seals, and O-rings.
Key technical data including operating temperature, power input, and physical dimensions.
A list of default parameters for various GALAXY GX2 setup screens.
To Next Page
