Galaxy GX2 Default Parameters
GALAXY GX2
71
US
9 Galaxy GX2 Default Parameters
Refer to the listing below for the default settings for each display screen for configuring the
GALAXY GX2. The settings can be changed for optimal performance in the user's facility.
Screen Name Parameter Default Setting
Date Setup Date Current date set during assembly
Time Zone Setup Time Zone Eastern Time (US_ Canada)
Time Setup Time Current time set during assembly
24 Hour Time off
Test Setup Allow Simulant Gas yes for all
%volume to 100%LEL US setting for all
Test Setup - Mode Bump Only off
Calibration Only off
Bump/Cal on Fail on
Classic Mode off
Test Setup - Calibration Calibration Interval (days) 30
Test Setup - Bump Bump Interval (days) 1
Security Setup Passcode 0000 (off)
GX2 Setup - GX2 USB Drive Enable on
Display PSI on
Display bar off
GX2 Setup - Datalog Download Periodic off
Download Session off
Erase After Download off
GX2 Setup - Printing Print Calibration Sticker off
Print Receipt off
Volume Setup Volume Medium
Backlight Setup Intensity Very High
USB Drive Enabled On
Language Setup Language English
Cylinder Setup 1-4 Auto Cylinder Enable all on
Expiration Setup 1-4 Weeks to Expiration 4 weeks
LEL Setup %volume setting All combustible gas 100%LEL volumes
set to ANSI standards
To Next Page
Loading...
