MSA galaxy GX2 - Connectivity and Storage Options

MSA AUER
MSA
Introduction
GALAXY GX2
11
US
Fig. 3 Test Stand Physical Features
SD or SDHC Memory Card Slot
A memory card port is provided on the Test Stand for calibration and bump record storage. An
SD
or SDHC memory card can be purchased from MSA (preferred) or from the following manu-
facturers:
- Kingston
- PNY
- SanDisk
- Lexar
- Wintec
The data on an SD or SDHC memory card is encrypted for use with MSA Link™ or the
MSA Link Pro application. The type and amount of data recorded to the memory card is contin-
gent on whether the Test Stand is networked.
Test Stand Networked to a PC
When the Test Stand is networked to a PC through the
Ethernet port, test records, datalogs, and
settings will be transmitted from the GALAXY GX2 to the PC interface.
If the network connection is lost only calibration and bump records are saved to the memory card.
If the Ethernet connection is restored, the Test Stand will transmit the stored calibration and bump
records from the memory card to the PC interface.
1 Touch Screen Display 4 SD Card Port
2 Status LED 5 USB Port
3 Test Stand to Test Stand connector 6 Gas plugs
1
2
3
4
5
6
The use of MSA Link Pro via a network connection is required to download datalogs
from the instrument. Due to potentially large file sizes datalogs are not saved to the
memory card in the Test Stand.