GB
Maintenance
20
4.5 Use with Sample Line
(1) Rotate the cap counterclockwise and pull the cap and wand.
(2) Remove wand assembly.
(3) Insert sample line assembly through cap and reattach cap.
4.6 Storage
When not in use, store your device in a safe, dry place between -5 °C and 40 °C
[23° and 104° F°].
4.7 Shipment
Pack the ALTAIR Pump Probe in its original shipping container with suitable
padding. If the original container is unavailable, an equivalent container may be
substituted. Seal Pump Probe in a plastic bag to protect it from moisture. Use
sufficient padding to protect it from the rigors of handling. Damage due to
improper packaging or damage in shipment is not covered by the device's
warranty.
4.8 Troubleshooting
The ALTAIR Pump Probe will operate reliably for years when cared for and
maintained properly. If the device becomes inoperative, you may return inoper-
ative devices to MSA for repair. Visit www.MSAsafety.com for additional infor-
mation.
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it - info@fasit.it
To Next Page
Loading...
