MSA FieldServer ProtoNode FPC-N34 - Physical Dimensions; Serial-Ethernet Protonode Drawing

49 pages

Save Page as PDF

To Next Page

To Previous Page

2.2 Physical Dimensions

2.2.1 Serial-Ethernet ProtoNode Drawing

7 ProtoNode Start-up Guide

Main Page

Table of Contents3
About the MSA Fieldserver Protonode5
Certification5
Equipment Setup6
Mounting6
Physical Dimensions7
Serial-Ethernet Protonode Drawing7
Lonworks Protonode Drawing8
Bacnet/Lonworks Setup through Protonode9
Features9
Installation Steps for the Customer9
Record Identification Data9
Configure the DIP Switches10
Setting the Node/ID Device Instance (DIP Switch A0 - A7)10
Setting the Serial Baud Rate (DIP Switch B0 - B3)10
Select and Load Configuration Files11
Interfacing Protonode to Host OEM Device12
Protonode FPC-N34 and FPC-N35 Showing Connection Ports12
Device Connections to Protonode13
Rs-485 / Rs-23213
Knx14
M-Bus14
Resistor and Power Jumper Information15
Bias Resistors15
Termination Resistor16
Power Jumper Settings16
Wiring Field Port to RS-485 BMS Network17
Wiring Field Port to a Lonworks Network17
Power up the Protonode18
Connect the PC to the Gateway19
Connecting to the Gateway Via Ethernet19
Changing the Subnet of the Connected PC19
Navigate to the Login Page19
Setup Web Server Security20
Login to the Fieldserver20
Select the Security Mode22
HTTPS with Own Trusted TLS Certificate23
HTTPS with Default Untrusted Self-Signed TLS Certificate or HTTP with Built-In Payload Encryption23
Configure the Fieldserver24
Setting IP Address for Field Network24
Accessing the Fieldserver Manager25
Commissioning the Protonode on a Lonworks Network26
Instructions to Download XIF File from Protonode Using Browser26
Troubleshooting28
Lost or Incorrect IP Address28
Viewing Diagnostic Information29
Checking Wiring and Settings30
Taking a Fieldserver Diagnostic Capture31
LED Functions32
Internet Browser Software Support32
Additional Information33
Update Firmware33
Bacnet: Setting Network_Number for more than One Protonode on Subnet33
Reading Data Arrays34
Change Web Server Security Settings after Initial Setup35
Change Security Mode36
Edit the Certificate Loaded Onto the Fieldserver37
Change User Management Settings38
Create Users39
Edit Users40
Delete Users41
Change Fieldserver Password42
Routing Settings43
Specifications44
Warnings45
Compliance with en IEC 62368-145
A Bank DIP Switch Settings46
Limited 2 Year Warranty49

MSA FieldServer ProtoNode FPC-N34 - Physical Dimensions; Serial-Ethernet Protonode Drawing

Table of Contents

Related product manuals