Need help?Do you have a question about the MSA fieldserver ProtoNode and is the answer not in the manual?
Details BTL and LonMark certifications, signifying product quality and interoperability standards adherence.
Overview of ProtoNode's capabilities, including Ethernet interface and multi-protocol support.
Step-by-step guide for customers to install and configure the ProtoNode, including DIP switch settings.
Instructions on recording the unique part number of the ProtoNode for technical support purposes.
Guidance on setting the DIP switches for baud rate, Node-ID/Device Instance, and configuration files.
Diagrams and labels identifying the connection ports for ProtoNode FPC-N34 and FPC-N35 models.
Details on connecting RS-485 devices to the 6-pin Phoenix connector of the ProtoNode.
Explanation of bias resistors' function in keeping the RS-485 bus in a known state during idling.
Information on termination resistors used to reduce noise and keep RS-485 bus lines together.
Details on setting the power jumper (Position A/B) for different power supply requirements.
Instructions for connecting the RS-485 network wires to the ProtoNode FPC-N34 and configuring EOL termination.
Guidance on connecting the ProtoNode to a LonWorks network using approved cables.
Steps for connecting a PC to the ProtoNode via an Ethernet cable for initial setup.
Guide for configuring the PC's IP address and subnet mask to match the ProtoNode's network.
Instructions on how to access the FieldServer's web login page using a web browser.
First-time login procedure for the FieldServer GUI, including handling browser security warnings.
Options for selecting the web server security profile: HTTPS with trusted certificates or HTTP.
Guide for configuring IP settings, BACnet parameters, and network numbers within the FieldServer GUI.
Information on accessing the FieldServer Manager tab for cloud connectivity, configuration, and maintenance.
Steps for commissioning the ProtoNode FPC-N35 by a LonWorks administrator, including service pin activation.
Procedure to download the XIF file from the ProtoNode FPC-N35 via a web browser for LonWorks configuration.
Steps to locate a lost or incorrect IP address using the FieldServer Toolbox utility.
How to view connection status and diagnostic information through the web browser or FieldServer Toolbox.
Troubleshooting guide for COM issues on Modbus RTU/TCP and Field COM protocols by checking wiring and settings.
Procedure for performing a diagnostic capture and emailing it to technical support for accelerated problem diagnosis.
Explanation of the LED indicators (SPL, RUN, ERR, RX, TX, PWR) on the ProtoNode for status monitoring.
Instructions for updating the ProtoNode's firmware using the web browser and file transfer.
Guide for assigning unique BACnet Network_Number values when multiple ProtoNodes are on the same subnet.
Steps to access and view data arrays, map descriptors, and offsets via the browser interface.
Instructions on modifying web server security settings, requiring a FieldServer reboot for changes to take effect.
Instructions for managing user accounts, including creating, editing, deleting, and password changes.
Guide for setting up IP routing rules for internet and network connections, defining destination, netmask, and gateway.
Technical specifications for ProtoNode FPC-N34/N38 and FPC-N35/N39 models, including connections and approvals.
Instructions and requirements for UL compliance, including power supply, cabling, and installation environment.
Detailed table of A Bank DIP switch settings for various addresses (A0-A7) to configure Node-ID/Device Instance.
Details BTL and LonMark certifications, signifying product quality and interoperability standards adherence.
Overview of ProtoNode's capabilities, including Ethernet interface and multi-protocol support.
Step-by-step guide for customers to install and configure the ProtoNode, including DIP switch settings.
Instructions on recording the unique part number of the ProtoNode for technical support purposes.
Guidance on setting the DIP switches for baud rate, Node-ID/Device Instance, and configuration files.
Diagrams and labels identifying the connection ports for ProtoNode FPC-N34 and FPC-N35 models.
Details on connecting RS-485 devices to the 6-pin Phoenix connector of the ProtoNode.
Explanation of bias resistors' function in keeping the RS-485 bus in a known state during idling.
Information on termination resistors used to reduce noise and keep RS-485 bus lines together.
Details on setting the power jumper (Position A/B) for different power supply requirements.
Instructions for connecting the RS-485 network wires to the ProtoNode FPC-N34 and configuring EOL termination.
Guidance on connecting the ProtoNode to a LonWorks network using approved cables.
Steps for connecting a PC to the ProtoNode via an Ethernet cable for initial setup.
Guide for configuring the PC's IP address and subnet mask to match the ProtoNode's network.
Instructions on how to access the FieldServer's web login page using a web browser.
First-time login procedure for the FieldServer GUI, including handling browser security warnings.
Options for selecting the web server security profile: HTTPS with trusted certificates or HTTP.
Guide for configuring IP settings, BACnet parameters, and network numbers within the FieldServer GUI.
Information on accessing the FieldServer Manager tab for cloud connectivity, configuration, and maintenance.
Steps for commissioning the ProtoNode FPC-N35 by a LonWorks administrator, including service pin activation.
Procedure to download the XIF file from the ProtoNode FPC-N35 via a web browser for LonWorks configuration.
Steps to locate a lost or incorrect IP address using the FieldServer Toolbox utility.
How to view connection status and diagnostic information through the web browser or FieldServer Toolbox.
Troubleshooting guide for COM issues on Modbus RTU/TCP and Field COM protocols by checking wiring and settings.
Procedure for performing a diagnostic capture and emailing it to technical support for accelerated problem diagnosis.
Explanation of the LED indicators (SPL, RUN, ERR, RX, TX, PWR) on the ProtoNode for status monitoring.
Instructions for updating the ProtoNode's firmware using the web browser and file transfer.
Guide for assigning unique BACnet Network_Number values when multiple ProtoNodes are on the same subnet.
Steps to access and view data arrays, map descriptors, and offsets via the browser interface.
Instructions on modifying web server security settings, requiring a FieldServer reboot for changes to take effect.
Instructions for managing user accounts, including creating, editing, deleting, and password changes.
Guide for setting up IP routing rules for internet and network connections, defining destination, netmask, and gateway.
Technical specifications for ProtoNode FPC-N34/N38 and FPC-N35/N39 models, including connections and approvals.
Instructions and requirements for UL compliance, including power supply, cabling, and installation environment.
Detailed table of A Bank DIP switch settings for various addresses (A0-A7) to configure Node-ID/Device Instance.
To Next Page
General
