MSA FireHawk M7 - Flow Test Requirements

UPGRADE INSTRUCTIONS
FLOW TEST REQUIREMENTS
1. The air mask must be flow tested following the
u
pgrade procedures and on an annual basis.
2. The air mask must be tested on a Biosystems
Posicheck 3 using the MSA Pro-Check 3 Software.
The following tests should be performed:
a. Visual Inspection
b
. Facepiece Leak Test
c. Static Facepiece Pressure
d. High Pressure Leak Test
e. Pressure Gauge Accuracy
f. Standard Work Rate
g. Maximum Work Rate
h. Alarm Accuracy
i. Bypass Test
20
TAL 808 (L) Rev. 1 - 10090073