assembly opening. Once the release is lifted,
r
emove the cover by pulling it away from the hous-
ing. Tilt the cover and work it over one adapter bay-
o
net at a time.
b. For the Firehawk Slide-To-Connect Regulator:
Remove the cover by pulling it away from the hous-
ing.
c. For the Firehawk
P
ush-To-Connect
Regulator: Pull the
cover to release the
retaining hook. With
the cover between
the hex flats and
flange of the adapter,
turn the adapter
counter-clockwise to
remove.
Be careful that you do not damage internal parts of
the comonent housing assembly (exhalation valve,
spring retainer, or speaking diaphragm) once the cover
is removed.
TAL 808 (L) Rev. 1 - 10090073
5
INTRODUCTION
To Next Page
Loading...
