To Next Page

To Previous Page

1 BACnet Router Description

The BACnet Router provides stand-alone routing between BACnet networks such as BACnet/IP, BACnet Ethernet, and

BACnet MS/TP – thereby allowing the system integrator to mix BACnet network technologies within a single BACnet

internetwork. There are three physical communication ports on the BAS Router. One is a 10/100 Mbps Ethernet port and the

other two are RS-485 MS/TP ports. Configuration is accomplished via a web page.

The BACnet Router is cloud ready and connects with the Grid MSA Safety’s FieldServer cloud platform.

NOTE:For MSA Grid – FieldServer Manager information, refer to the MSA Grid - FieldServer Manager Start-up

Guide online through the MSA website.

NOTE:The latest versions of instruction manuals, driver manuals, configuration manuals and support utilities

are available online through the MSA FieldServer webpage.

BACnet Router Start-up Guide 5

Questions and Answers:

Need help?

Do you have a question about the MSA FS-ROUTER-BAC2 and is the answer not in the manual?

MSA FS-ROUTER-BAC2 Specifications

General