MSA Ultima X Instruction Manual

Table 1-1.
Performance Specifications
for Ultima X Sampling Module - Aspirated Model
ASPIRATOR AIR Instrument grade air
REQUIREMENTS
MAXIMUM 30 PSIG (206 kPa)
ASPIRATOR
PRESSURE
MINIMUM .6 CFM at 20 PSIG (137 kPa)
ASPIRATOR AIR
CONSUMPTION
MAXIMUM .9 CFM at 30 PSIG (206 kPa)
ASPIRATOR AIR
CONSUMPTION
MAXIMUM POWER 1.8 watts at 9 to 30 VDC
CONSUMPTION
CABLE Four conductor, shielded, 18 AWG (typical)
REQUIREMENTS
FOR ALL GASES
SAMPLE 30 seconds at 0.5 LPM with 50 feet (15.25 meters)
TRANSPORT TIME of .180 (4.57 mm) ID sample tubing
NOMINAL SAMPLE 2 CFH (1 LPM)
FLOW RATE
MINIMUM SAMPLE 1 CFH (.500 LPM)
FLOW RATE
MAXIMUM SAMPLE 100 feet (30 meters)
TUBING LENGTH
MAXIMUM EXHAUST 20 feet (6 meters)
TUBING LENGTH
INLET FITTINGS 1/4" (6.35 mm) OD Tube Fitting
EXHAUST FITTING 1/4" (6.35 mm) OD Tube Fitting
CALIBRATION 1/4" (6.35 mm) OD Barbed Fitting
FITTING
OVERALL 9" x 6" x 5" (228.5 cm x 152.4 cm x 127 cm)
DIMENSIONS
WEIGHT 4.5 lbs. (2 kg)
RATING Explosion-proof enclosure, Class I,
Groups A, B, C and D, Division 1, Hazardous Locations
ELECTRICAL 3/4-14 NPT
ENTRY
TROUBLE 0.6 Amps at 125 VAC
RELAY 0.6 Amps at 110 VDC
RATING 2 Amps at 30 VDC
1-4

MSA Ultima X Specifications

General

Ingress Protection	IP66/67
Enclosure	Explosion-proof
Detection Method	Electrochemical, Infrared, Catalytic Bead
Gases Detected	Combustible gases, Toxic gases, Oxygen
Display	LCD
Output	4-20 mA, HART
Housing Material	Stainless steel
Certifications	ATEX, IECEx, UL, CSA, SIL 2