3-22
MS-6585 ATX Mainboard
AC97 Audio
This item is used to enable or disable the onboard AC’97 (Audio Codec’97)
feature. Selecting Auto allows the mainboard to detect whether an audio device
is used. If an audio device is detected, the onboard AC’97 controller will be
enabled; if not, the controller is disabled. Disable the function if you want to
use other controller cards to connect an audio device. Settings: Disabled and
Auto.
Onboard LAN Device
This item is used to enable/disable the onboard LAN controllers. Settings:
Enabled, Disabled.
Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
Floppy Controller
This is used to enable or disable the onboard Floppy controller.
Serial Port A/B
These items specify the base I/O port addresses of the onboard Serial Port 1
(COM A)/Serial Port 2 (COM B). Selecting Auto allows AMIBIOS to auto-
matically determine the correct base I/O port address. Settings: Auto, 3F8/
COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4 and Disabled.
Option Description
Auto BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enabled Enables the onboard Floppy controller.
Disabled Disables the onboard Floppy controller.
To Next Page
Loading...
