3-21
BIOS Setup
Integrated Peripherals
Please note that the options showed on your BIOS might be different
depending on the motherboard you buy.
OnBoard PCI IDE
This setting controls the onboard PCI IDE controllers. Setting options: Disabled,
Primiary, Secondary, Both.
USB Function
This setting is used to enable/disable the onboard USB function.
USB 2.0 Support
This setting is used to enable/disable the onboard USB 2.0 controllers.
USB Legacy Support
Set to All Device if your need to use any USB 1.1/2.0 device in the operating
system that does not support or have any USB 1.1/2.0 driver installed, such as
DOS and SCO Unix. Set to No Mice only if you want to use any USB device
other than the USB mouse. Setting options: Disabled, Enabled.
To Next Page
Loading...
