AMI
®
BIOS Setup
3-15
Power Management Setup
Sleep State
This item specifies the power saving modes for ACPI function. Options are:
S1/POS The S1 sleep mode is a low power state. In this state,
no system context is lost (CPU or chipset) and hard-
ware maintains all system context.
S3/STR The S3 sleep mode is a lower power state where the
information of system cofiguration and open applica-
tions/files is saved to main memory that remains
powered while most other hardware components turn
off to save energy. The information stored in memory
will be used to restore the system when an wake up
event occurs.
The default value is S1/POS.
AMIBIOS SETUP - POWER MANAGEMENT SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
ESC : Quit ↑↓←→ : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Load Previous Values
F6 : Load Fail-Safe Defaults
F7 : Load Optimized Defaults
Sleep State :S1/POS
Sleep State LED :Dual Color
Suspend Time Out (Minute) :Disabled
Display Activity :Ignore
IRQ3 :Monitor
IRQ4 :Monitor
IRQ5 :Ignore
IRQ7 :Monitor
IRQ9 :Ignore
IRQ10 :Ignore
IRQ11 :Ignore
IRQ13 :Ignore
IRQ14 :Monitor
IRQ15 :Ignore
Power Button Function :Suspend
Power Again :Last State
Wake Up On Ring/LAN :Enabled
Wake Up On PME# :Enabled
Resume By Alarm :Disabled
Alarm Date :15
Alarm Hour :12
Alarm Minute :30
Alarm Second :30
To Next Page
Loading...
