MSI H67MS-E33 series - Page 46

3-10
BIOS Setup
MS-7680
Chapter 3
BIOS Setup
MS-7680
Chapter 3
GT OverClockng
Ths tem allows you to enable/ dsable the overclockng of ntegrated graphcs.
GT Rato
Ths settng controls the rato of ntegrated graphcs frequency to enable the ntegrated
graphcs to run at d󰘯erent frequency combnatons.
Adjusted GT Frequency
It shows the adjusted ntegrated graphcs frequency. Read-only.
VDroop Control
Ths tem s used to select the VDroop control mode.
CPU Vcore/ DRAM Voltage/ GPU Voltage/ PCH 1.05
These tems are used to adjust the voltage of CPU, Memory, GPU and chpset.
Current CPU Vcore/ Current DRAM Voltage/ Current GPU Voltage
These tems show current CPU Vcore/ DRAM/ GPU voltage. Read-only.
Overclockng Pro󰘰le
Press <Enter> to enter the sub-menu.
Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these tems are used to save
the current settngs, and you can to load the settngs from the stored pro󰘰le.
OC Retry Count
When overclockng has faled, settng ths tem as [1, 3] wll allow system to reboot
1/ 3 tmes wth the same overclocked con󰘰guraton. If overclockng has faled every
tme, the system wll restore the defaults.
CPU Spec󰘰catons
Press <Enter> to enter the sub-menu. The submenu shows the nformaton of nstalled
CPU.
CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the nstalled CPU tech
-
nologes. Read only.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶