MSI H67MS-E33 series User Manual

Intel RAID
MS-7680
Appendx B
B-3
Intel RAID
MS-7680
Appendx B
BIOS Con󰘰guraton
The Intel Matrx Storage Manager Opton ROM should be ntegrated wth the system
BIOS on all motherboards wth a supported Intel chpset. The Intel Matrx Storage Man-
ager Opton ROM s the Intel RAID mplementaton and provdes BIOS and DOS dsk
servces. Please use <Ctrl> + <I> keys to enter the “Intel
®
RAID for Seral ATA” status
screen, whch should appear early n system boot-up, durng the POST (Power-On Self
Test). Also, you need to enable the RAID functon n BIOS to create, delete and reset
RAID volumes.
Usng the Intel Matrx Storage Manager Opton ROM
Creatng, Deletng and Resettng RAID Volumes:
The Seral ATA RAID volume may be con󰘰gured usng the RAID Con󰘰guraton utlty
stored wthn the Intel RAID Opton ROM. Durng the Power-On Self Test (POST), the
followng message wll appear for a few seconds.
Important
The “Devce Model”, “Seral #” and “Sze” n the followng example mght be d󰘯erent
from your system.
RAID Volumes
None de󰘰ned.
Physcal Dsks:
Port Devce Model Seral # Sze Type/Status(Vol ID)
1 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB
Non-RAID Dsk
2 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB
Non-RAID Dsk
Press <CTRL-I> to enter Con󰘰guraton Utlty..
After the above message shows, press <Ctrl> and <I> keys smultaneously to enter the
RAID Con󰘰guraton Utlty.
Important
The followng procedure s only avalable wth a newly-bult system or f you are renstall-
ng your OS. It should not be used to mgrate an exstng system to RAID.

MSI H67MS-E33 series Specifications

General

Brand	MSI
Model	H67MS-E33 series
Category	Motherboard
Language	English