2-5
Hardware Setup
Installing AMD Athlon64 CPU Cooler Set
When you are installing the CPU, make sure the CPU has a heat sink and a
cooling fan attached on the top to prevent overheating. If you do not have the
heat sink and cooling fan, contact your dealer to purchase and install them before
turning on the computer.
1. Detach the shield of the
backplate’s paster.
2. Turn over the mainboard, and
install the backplate to the
proper position.
3. Turn over the mainboard
again and place the main-
board on the flat surface.Lo-
cate the two screw holes of
the mainboard.
4. Align the retention mechanism
and the backplate. Fix the re-
tention mechanism and the
backplate with two screws.
retention mechanism
To Next Page
Loading...
