MSI K8MM-ILSR

2-14
MS-6741 Micro-ATX Mainboard
The mainboard provides connectors to connect FDD, IDE HDD, front panel of the
system case, audio ports, USB Ports, and CPU/System FANs.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports 360KB,
720KB, 1.2MB, 1.44MB and 2.88MB floppy disk types.
Connectors
FDD1
Fan Power Connectors: CFAN1, SFAN1
The CAN1 (processor fan) and SFAN1 (system fan) support system cooling fan with
+12V. It supports 3-pin head connector. When connecting the wire to the connectors,
always take note that the red wire is the positive and should be connected to the
+12V, the black wire is Ground and should be connected to GND. If the mainboard
has a System Hardware Monitor chipset on-board, you must use a specially de-
signed fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for proper CPU cooling fan.
CFAN1
SFAN1
SENSOR
+12V
GND
Fan Connector
Pin Definition