2-16
MS-6741 Micro-ATX Mainboard
MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, which will
cause the loss of data during the transmission.
Connect to SATA1 or SATA2
Take out the dust cover and
connect to the hard disk
devices
Optional Serial ATA cable
Serial ATA/Serial ATA RAID Connectors controlled by VT8237:
SATA1 & SATA2
The Southbridge of this mainboard is VIA VT8237 which supports two serial connec-
tors SATA1& SATA2.
SATA1 & SATA2 are dual high-speed Serial ATA interface ports. Each supports 1
st
generation serial ATA data rates of 150 MB/s. Both connectors are fully compliant
with Serial ATA 1.0 specifications. Each Serial ATA connector can connect to 1 hard
disk device. Please refer to Appendix A: VIA VT8237 Serial ATA RAID Introduction at
page A-1for detail software installation procedure.
SATA1 & SATA2 Pin Definition
Pin Signal Pin Signal
1 GND 2 TXP
3 TXN 4 GND
5 RXN 6 RXP
7 GND
SATA1
71
SATA2
To Next Page
Loading...
