3-11
BIOS Setup
Advanced Chipset Features
LDT to AGP Lokar (Upstream) / LDT to AGP Width (Downstream)
These two item control the utilized widths of the HyperTransport link. Setting options:
8 bit, 16 bit.
LDT to AGP Lokar Frequency
This item specifies the maximum operating frequency of the link's transmitter clock.
Setting options: 800 MHz, 600 MHz, 400 MHz, 200 MHz.
Memclock Mode
This field allows you to select the DDR timing setting. Setting to Auto enables Memclock
Mode automatically to be determined by SPD. Selecting Limit allows users to configure
these fields manually.
Memclock Value
When it is set to Limit in “Memclock Mode”, user can place an artificial memory clock
limit on the system. Please note that memory is prevented from running faster than
this frequency. Setting options: DDR200, DDR266, DDR300, DDR333, DDR400.
Bank Interleaving
This field selects 2-bank or 4-bank interleave for the installed SDRAM. Disable the
function if 16MB SDRAM is installed. Settings: Disabled, Auto.
MSI Reminds You...
Change these settings only if you are familiar with the chipset.
To Next Page
Loading...
