MSI K8MM-ILSR

3-15
BIOS Setup
Wake Up On PME, Resume On KBC (with “Wake-Up Key” and “Wake-Up
Password”), Resume On PS/2 Mouse
These fields specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or compo-
nent is detected. Settings: Enabled, Disabled.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on a scheduled
time/date from the soft off (S5) state. Settings: Enabled, Disabled.
Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically resume (boot up)
on a specific date/hour/minute/second specified in these fields. Available settings for
each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
MSI Reminds You...
For “Wake-Up Key” function, the option “Specific Key” refers to the
password you specify in the “Wake-Up Password” field. Once you set up
a password, it will disable “Resume on PS/2 Mouse”.
MSI Reminds You...
If you have changed this setting, you must let the system boot up until it
enters the operating system, before this function will work.