3-17
BIOS Setup
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local bus has
bus mastering capability. Settings options: Disabled, Enabled.
Primary Graphics Adaptor
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
AGP The system initializes the installed AGP card first. If the AGP card is
not available, it will initialize the PCI VGA card.
PCI The system initializes the installed PCI VGA card first. If the PCI VGA
card is not available, it will initialize the AGP card.
PCI Slot1 IRQ, PCI Slot2 IRQ, PCI Slot3 IRQ
These items specify the IRQ line for each PCI slot. Setting options: 3, 4, 5, 7, 9, 10, 11,
Auto. Selecting Auto allows BIOS to automatically determine the IRQ line for each PCI
slot.
To Next Page
Loading...
