3-22
MS-6741 Micro-ATX Mainboard
DDR Voltage (V)
Adjusting the DDR voltage can increase the DDR speed. Any changes made to this
setting may cause a stability issue, so changing the DDR voltage for long-term
purpose is NOT recommended. Setting options: 2.55, 2.60, 2.65, 2.70, 2.75, 2.80,
2.85.
AGP Voltage (V)
AGP voltage is adjustable in the field, allowing you to increase the performance of
your AGP display card when overclocking, but the stability may be affected. Setting
options: Auto, 1.55, 1.60, 1.65, 1.70, 1.75, 1.80, 1.85.
MSI Reminds You...
The settings shown in different color in DDR Voltage (V) and AGP
Voltage (V) helps to verify if your setting is proper for your system.
White: Safe setting.
Yellow: High performance setting.
Red: Not recommended setting and the system may be unstable.
To Next Page
Loading...
