MS-7520 Mainboard
D-6
6. Then select the capacity of the RAID set in the Size field. The default value is the
maximum capacity of the selected disks. Then press <Enter> to the Confirm Crea-
tion field.
7. The Creation field will display a message to ask you to confirm the creation. Then
press <Y> key to proceed with the RAID set creation.
8. Then the following screen appears to indicate that the creation is finished.
9. Go to the Save And Exit Setup field and press <Enter>, a message will display to
ask you to confirm the setup. Then press <Y> key to save the setting and exit the
BIOS utility.
To Next Page
Loading...
Need help?
General
