mspa Lite Bubble Spa User Manual

2016 MSpa Service Manual
MSpa website: www.the-mspa.com
- 19 -
Chapter 5. Trouble Shooting Guide
5.1 The following Check Flow is as attached.
Lite Bubble Spa Check Flow – E0
Lite Bubble Spa Check Flow – E1
Lite Bubble Spa Check Flow – E2
Lite Bubble Spa Check Flow – E3
Tips
：
To k e e p t h e filter pump and heater at a great performance, proper maintenance and cleaning of filter
pump, paper filter cartridge and water inlet is highly recommended. How often to clean depends on the local
water conditions and user habits. Regular fresh water and vinegar are suggested for the filter pump cleaning.
5.2 Water Leaking Problem Checking Flow Chart
Fasten the water inlet or outlet tightly. If there is still water
leaking, replace a new inlet or outlet.
Screw up the pipe tightly or
re-glue the drainage pipe
Fix the pool bottom with the given
repair kit or replace a new liner.
Screw up the pipe tightly or
re-glue the connecting pipes
Replace the broken
connecting pipes or filter
pump.
1. There is water leaking
between control box and
the spa pool (or spa
liner)
2. There is water leaking
at bottom of the spa pool
body
3. Water leaking from the
control box
2.1 Water is leaking from
spa liner bottom.
2.2 Water is leaking from
drainage pipe. Check if
drainage pipe is loose.
3.1 Connecting pipes or
filter pump became loose
3.2 Connecting pipes
and filter pump is
broken.

mspa Lite Bubble Spa Specifications

General

Brand	mspa
Model	Lite Bubble Spa
Category	Hot Tub
Language	English